MM-6170F

128MB Non-Volatile Solid State FLASH PMC
Features
Capacity: 64MB, 128MB
Optimum high speed booting source
Totally Non-Volatile
20 year data retention and up to 1,000,000 write/erase cycles
Fully compliant with PMC Specification rev. 2.1
Performs reads at over 20 MB/s
VxWorks driver included
PMC DMA Initiator for bus Mastering
Available in semi-rugged, extended temp. version
Supports Interrupts
Solid State
Description

The MM-6170F is a 32-bit/33MHz PCI Mezzanine Card (PMC). NOR FLASH chips are utilized to provide up to 128MB of non-volatile, solid state memory. This technology makes the MM-6170F the optimum high speed booting source, performing burst read transfers at over 20 MB/s. In addition to being non-volatile, the card can be reprogrammed in place without ever removing it from the carrier card. The card is capable of being both a target memory and a DMA initiator in order to maximize throughput. The NOR FLASH technology provides 20 year data retention and up to 1,000,000 write/erase cycles.
A complete VxWorks driver and BIST is included.
The configurable space header of the MM-6170F returns a class code of 05h, indicating that it is a memory controller, and a sub-class code of 00h, indicating that it is a RAM module.
Reliability is ensured by burn-in and running memory diagnostics that check operation for 48 hours while temperature-cycling boards from 0° to 70°C. Reliability is backed up by Micro Memory, LLC's Lifetime Warranty.

MM-6170F Specifications
bullet

Capacity : 64MB, 128MB
bullet

Transfer Rate : Read – Over 20 MB/s, Write – Under 1 MB/s
bullet

Bus Mastering : DMA Initiator for Bus Mastering necessary to maximize transfers.
bullet

Compatibility : Compatible with PMC Local Bus Specification Rev 2.1
bullet

Module Selection : Software selectable through I/O registers
bullet

Operating Temperature : 0° to 70°C
bullet

Storage Temperature : -40°C to 85°C
bullet

Relative Humidity : Up to 95% without condensation
bullet

Power Requirements : 5V @ 1.2A, Max (operational)